| View previous topic :: View next topic |
| Author |
Message |
rwakeford
Joined: 30 Jul 2006
Posts: 27
|
 Posted: Mon Sep 04, 2006 9:54 pm Post subject: Chart details not showing |
 |
|
I've just upgraded to 1.6.5 on both my TB! and Voyager setups. For some reason both the Chart and Table in the TB! version are now showing zero for all details although the log is still complete. Voyager, however, is displaying the Chart/Table with all details as from the 1.6.4 installation.
I know this must be totally my fault but what can I possibly have done in the upgrade to loose the Chart settings?
OK, it's not earth shatteringly important as I still have the log to view, but I'd just like to know what I've done wrong so that I don't do it again. I did just do a simple install over the original in both versions so it's strange.
So glad to see, from another post, that we will soon be able to sort the log columns. I was about to write a wish for that when I read the post and your response.
Richard |
|
| Back to top |
|
 |
vetaltm
Author
Joined: 05 Feb 2006
Posts: 748
|
| Posted: Tue Sep 05, 2006 8:52 pm Post subject: Re: Chart details not showing |
|
|
| rwakeford wrote: | I've just upgraded to 1.6.5 on both my TB! and Voyager setups. For some reason both the Chart and Table in the TB! version are now showing zero for all details although the log is still complete. Voyager, however, is displaying the Chart/Table with all details as from the 1.6.4 installation.
I know this must be totally my fault but what can I possibly have done in the upgrade to loose the Chart settings?
OK, it's not earth shatteringly important as I still have the log to view, but I'd just like to know what I've done wrong so that I don't do it again. I did just do a simple install over the original in both versions so it's strange.
|
There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case. |
|
| Back to top |
|
|
rwakeford
Joined: 30 Jul 2006
Posts: 27
|
| Posted: Tue Sep 05, 2006 9:05 pm Post subject: |
|
|
| Quote: | | The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case. |
OK, thanks. It wasn't earth shatteringly important and I was just curious as to why it happened.
Richard |
|
| Back to top |
|
|
rwakeford
Joined: 30 Jul 2006
Posts: 27
|
| Posted: Sat Sep 16, 2006 8:14 am Post subject: |
|
|
| Quote: | | There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case. |
Very strange. I've just downloaded 1.6.7.2 and exactly the same thing has happened. The log file is still there (thank you very much for making the columns sortable) but no statisitcs. However the Voyager version downloaded and installed perfectly and has kept the statisitics.
I was also, as with version 1.6.5, asked for my registration details with the desktop TB! version but not with Voyger.
Richard |
|
| Back to top |
|
|
axn
Joined: 11 Sep 2006
Posts: 30
|
| Posted: Sat Sep 16, 2006 8:31 am Post subject: |
|
|
I just upgraded to 1.6.7 and everything is fine.
All stats perfect.
Just in case ... |
|
| Back to top |
|
|
rwakeford
Joined: 30 Jul 2006
Posts: 27
|
| Posted: Sat Sep 16, 2006 9:28 am Post subject: |
|
|
| Quote: | I just upgraded to 1.6.7 and everything is fine.
All stats perfect. |
Yes, I think I'm very much in the minority here. 
I just can't understand why my Voyager installation is fine but TB! throws a wobbly at me. Ah well.
Richard |
|
| Back to top |
|
|
vetaltm
Author
Joined: 05 Feb 2006
Posts: 748
|
| Posted: Mon Sep 18, 2006 11:58 pm Post subject: |
|
|
| rwakeford wrote: | | Quote: | | There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case. |
Very strange. I've just downloaded 1.6.7.2 and exactly the same thing has happened. The log file is still there (thank you very much for making the columns sortable) but no statisitcs. However the Voyager version downloaded and installed perfectly and has kept the statisitics.
I was also, as with version 1.6.5, asked for my registration details with the desktop TB! version but not with Voyger.
|
I guess that you have installed the plug-in to its base directory. Please, install the plug-in to the different folder. The installation package contains several files with the same names as configuration files from base directory. The statistics, options, rules, classification database - you lost that data after installing a new version, because the correspondent files were rewritten by their templates with the default values from installation package.
I'm sorry that it wasn't explicitly stated in manual that the base and installation folders must be different. The template files in next versions will have different names to prevent overwriting and it will be possible to install everything to the same folder. |
|
| Back to top |
|
|
rwakeford
Joined: 30 Jul 2006
Posts: 27
|
| Posted: Tue Sep 19, 2006 10:44 pm Post subject: |
|
|
| Quote: | | I guess that you have installed the plug-in to its base directory. |
Yes, I did although I changed the directory name to "AntispamSniper" in both The Bat! and Voyager. It's strange that I did exactly the same install with both programmes and yet I only lost the chart in The Bat! whereas Voyager showes everything fine 
| Quote: | | The template files in next versions will have different names to prevent overwriting and it will be possible to install everything to the same folder. |
That's good, thank you very much.
Richard |
|
| Back to top |
|
|
|
FAQ
Search
Profile
Log in
Register
