antispamsniper.com Forum Index antispamsniper.com
The reliable anti-spam protection
 
 FAQFAQ   SearchSearch     ProfileProfile   Log inLog in   RegisterRegister 

Chart details not showing

 
Post new topic   Reply to topic    antispamsniper.com Forum Index -> AntispamSniper for TheBat!
View previous topic :: View next topic  
Author Message
rwakeford



Joined: 30 Jul 2006
Posts: 27

PostPosted: Mon Sep 04, 2006 9:54 pm    Post subject: Chart details not showing Reply with quote

I've just upgraded to 1.6.5 on both my TB! and Voyager setups. For some reason both the Chart and Table in the TB! version are now showing zero for all details although the log is still complete. Voyager, however, is displaying the Chart/Table with all details as from the 1.6.4 installation.

I know this must be totally my fault but what can I possibly have done in the upgrade to loose the Chart settings?

OK, it's not earth shatteringly important as I still have the log to view, but I'd just like to know what I've done wrong so that I don't do it again. I did just do a simple install over the original in both versions so it's strange.

So glad to see, from another post, that we will soon be able to sort the log columns. I was about to write a wish for that when I read the post and your response.

Richard
Back to top
View user's profile Send private message
vetaltm
Author


Joined: 05 Feb 2006
Posts: 739

PostPosted: Tue Sep 05, 2006 8:52 pm    Post subject: Re: Chart details not showing Reply with quote

rwakeford wrote:
I've just upgraded to 1.6.5 on both my TB! and Voyager setups. For some reason both the Chart and Table in the TB! version are now showing zero for all details although the log is still complete. Voyager, however, is displaying the Chart/Table with all details as from the 1.6.4 installation.

I know this must be totally my fault but what can I possibly have done in the upgrade to loose the Chart settings?

OK, it's not earth shatteringly important as I still have the log to view, but I'd just like to know what I've done wrong so that I don't do it again. I did just do a simple install over the original in both versions so it's strange.

There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case.
Back to top
View user's profile Send private message Send e-mail
rwakeford



Joined: 30 Jul 2006
Posts: 27

PostPosted: Tue Sep 05, 2006 9:05 pm    Post subject: Reply with quote

Quote:
The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case.


OK, thanks. It wasn't earth shatteringly important and I was just curious as to why it happened.

Richard
Back to top
View user's profile Send private message
rwakeford



Joined: 30 Jul 2006
Posts: 27

PostPosted: Sat Sep 16, 2006 8:14 am    Post subject: Reply with quote

Quote:
There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case.


Very strange. I've just downloaded 1.6.7.2 and exactly the same thing has happened. The log file is still there (thank you very much for making the columns sortable) but no statisitcs. However the Voyager version downloaded and installed perfectly and has kept the statisitics.

I was also, as with version 1.6.5, asked for my registration details with the desktop TB! version but not with Voyger.

Richard
Back to top
View user's profile Send private message
axn



Joined: 11 Sep 2006
Posts: 30

PostPosted: Sat Sep 16, 2006 8:31 am    Post subject: Reply with quote

I just upgraded to 1.6.7 and everything is fine.
All stats perfect.

Just in case ...
Back to top
View user's profile Send private message
rwakeford



Joined: 30 Jul 2006
Posts: 27

PostPosted: Sat Sep 16, 2006 9:28 am    Post subject: Reply with quote

Quote:
I just upgraded to 1.6.7 and everything is fine.
All stats perfect.


Yes, I think I'm very much in the minority here. Confused

I just can't understand why my Voyager installation is fine but TB! throws a wobbly at me. Ah well.

Richard
Back to top
View user's profile Send private message
vetaltm
Author


Joined: 05 Feb 2006
Posts: 739

PostPosted: Mon Sep 18, 2006 11:58 pm    Post subject: Reply with quote

rwakeford wrote:
Quote:
There are no changes in 1.6.5 that could be a reason for zeroing the statistics. I guess that the contents of the configuration file with the statistics was broken earlier (e.g. due to reason that is already fixed in 1.6.5). The plug-in re-creates the broken data by resetting the contents to default values, i.e. zeroes in case if statistics. If you didn't reset the statistics manually, then it is the most probable reason in the described case.


Very strange. I've just downloaded 1.6.7.2 and exactly the same thing has happened. The log file is still there (thank you very much for making the columns sortable) but no statisitcs. However the Voyager version downloaded and installed perfectly and has kept the statisitics.

I was also, as with version 1.6.5, asked for my registration details with the desktop TB! version but not with Voyger.

I guess that you have installed the plug-in to its base directory. Please, install the plug-in to the different folder. The installation package contains several files with the same names as configuration files from base directory. The statistics, options, rules, classification database - you lost that data after installing a new version, because the correspondent files were rewritten by their templates with the default values from installation package.

I'm sorry that it wasn't explicitly stated in manual that the base and installation folders must be different. The template files in next versions will have different names to prevent overwriting and it will be possible to install everything to the same folder.
Back to top
View user's profile Send private message Send e-mail
rwakeford



Joined: 30 Jul 2006
Posts: 27

PostPosted: Tue Sep 19, 2006 10:44 pm    Post subject: Reply with quote

Quote:
I guess that you have installed the plug-in to its base directory.


Yes, I did although I changed the directory name to "AntispamSniper" in both The Bat! and Voyager. It's strange that I did exactly the same install with both programmes and yet I only lost the chart in The Bat! whereas Voyager showes everything fine Sad

Quote:
The template files in next versions will have different names to prevent overwriting and it will be possible to install everything to the same folder.


That's good, thank you very much.

Richard
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    antispamsniper.com Forum Index -> AntispamSniper for TheBat! All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group